What affects the speed of fiber laser cutting machine?

The fiber cutting machine is a new type of fiber laser that is newly developed in the world. It outputs high-energy-density laser beams and gathers them on the surface of the workpiece, so that the area irradiated by the ultra-fine focus spot on the workpiece is instantly melted and vaporized, and moved through the CNC mechanical system. The spot irradiates the position to realize automatic cutting, with fast speed and high precision.

dsgs

In order to better use the laser cutting machine, let’s take a look at what affects the speed of the cutting machine:

1. The thickness and roughness of the material

Laser cutting is suitable for cutting thin plates. The effective thickness is carbon steel below 12mm and stainless steel below 6mm. The processed quality is significantly enhanced, and efficiency is also guaranteed. If you cut materials less than 1mm, the cut will be extremely smooth. The surface roughness of the material and the surface roughness of the material also determine the quality of the cutting. Generally, the smoother the material, the better the quality of the cut.

2. Working power and mode of laser equipment

Research has proved that the higher the power of the laser equipment, even if it is cutting the same sheet, the effect will be better than normal. The pattern and material of laser cutting have a certain degree of fit

3. Focus position

The focus of the laser cutting machine can be aligned, and the precision and accuracy of the cutting can meet the desired requirements.

Fourth, cutting speed

In fact, no matter what kind of material, the cutting speed can be extremely consistent with the material, then the cutting effect at this time is better, too fast or too slow will affect the laser cutting.

Five, auxiliary gas pressure and type

The higher the pressure of the auxiliary gas, the higher the purity of the gas, the less the impurities adhered to the material, and the smoother the cut. Generally speaking, the speed of oxygen cutting is fast, and the cutting effect of nitrogen is better, and the cost is also low. Different gases have different cutting effects.

This article is from Shandong Buluoer Intelligent Technology Co., Ltd. Please indicate the source for reprinting.


Post time: Aug-31-2021

Send your message to us:

Write your message here and send it to us